Monday
February 06, 2012

Recovery Info for Your Drive

 

Fujitsu

Maxtor

Hitachi

IBM

Quantum

Seagate

Samsung

Toshiba

Western Digital

 

Laptop Drives

External Drives

 
 

Data Recovery
Quick Start

[Home]  [Prices]  [Shipping]  [Payment]  [Answers & Articles]  [About Us]  [Contact Us] [Login]

Up to FAQ and Technical Articles

 
Error Messages.

You may come across the following error messages when your hard drive becomes damaged:

Fixed disk 0 failure / Failure Fixed Disk 0
Fixed disk 1 failure / Failure Fixed Disk 1
Fixed disk C failure / Failure Fixed Disk C
Fixed disk D failure / Failure Fixed Disk D
These messages indicate one or more of the following:
- Hard drive is not properly setup in CMOS
- Hard disk drive is not detectable
- Damaged hard disk drive
 
Hard Disk Fail (10), (20), or (80)  - caused by damaged hard drive.
 
Drive not ready   - Disk in the drive is not readable
 
Disk boot failure, insert system Disk and Press Enter   - All boot devices including hard drive are not bootable.
 
Invalid media, track 0 bad or unusable
 
- Format command cannot format the specified disk, OR
- The disk capacity is invalid, OR
- Damaged disk.
 
Invalid media type reading drive C:   - The operating system can not get an access to the bootable information from the hard drive.
 
Invalid / Non System Disk   - Hard disk drive does not have bootable information on it. The disk is damaged or not properly connected.
 
Non-System disk or disk error   - Usually indicates non bootable drive. Caused by unidentified hard drive model, non-formatted hard drive, or hard drive with missing system files.
 
1782 - Disk Controller Failure
 
1720 - Intellisafe Hard Disk Detects Imminent Failure
 
1771 - Primary Disk Port Address Resource Conflict
 
1772 - Primary Disk Port Address Resource Conflict
 
1780 - Disk 0 Failure
 
1781 - Disk 1 Failure
 
1782 - Disk Controller Failure
 
1790 - Disk 0 Failure
 
1791 - Disk 1 Failure
 
Hard Drive Parameter Table or BIOS Error - System Halted
 
HARD DISK INSTALL FAILURE - Cannot find or initialize the drive controller or the drive diagnosis failed
 
Primary master hard disk fail - POST detects an error in the primary master IDE hard drive.
 
Primary slave hard disk fail - POST detects an error in the secondary master IDE hard drive.
 
Secondary master hard disk fail - POST detects an error in the primary slave IDE hard drive.
 
Secondary slave hard disk fail - POST detects an error in the secondary slave IDE hard drive.
 
Hard Drive Kernel Error Messages:
langly kernel: hdb: dma_intr: status=0x51 - DriveReady SeekComplete Error
 
langly kernel: hdb: dma_intr: error=0x40 - Uncorrectable Error
 
1780 - hard disk error at boot
 
1790 - hard disk error at boot
 
Hard disk controller failure
Computer stops at verifying dmi pool data... - A serious disk error occurred trying to read/write drive
 
Missing Operating System - getting Bad Sectors, Clusters, and/or Missing Allocations
 
Error #72: DISK-MEDIA ERROR: HARD DRIVE - Your hard disk may be damaged.
 
Error Reading Drive 'C'
Data Error Reading Drive 'C'
Serious Disk Error Writing Drive 'C'
Seek Error
- Sector not found

From customer's correspondence

Carl S.
Castleford, West Yorkshire UK

Hitachi IC25N040ATMR04 40 GB laptop

From Customer's order

Drive missing in BIOS at system start. No other recover attempted as data is too precious! Drive simply removed from Gateway laptop and mounting chassis removed.

 

After recovery:

Many thanks folks!
My friends will be delighted and the photo file directories you have
recovered look to be exactly what they were looking for! MARVELLOUS!
ONCE AGAIN, THANK YOU!


Mary V.
IBM, Inc.
Waldwick, NJ USA

Fujitsu MHT2080AH 80 GB laptop

From Customer's order

HD was damaged when a liquid was spilled on the keyboard. Laptop failed to operate and when HD was swapped into a new laptop the OS was not recognized and laptop failed to boot.

 

After recovery:

Thank you for your excellent support and I'll be sure to recommend you to our customer support team in IBM.

Mary V.


Todd M.
inTEST Corp
Cherry Hill, NJ USA

Samsung SP1203N 120 GB

From Customer's order

The drive is recognized by the BIOS, some folders can not be accessed. We get an I/O error or eplorer.exe error when we try to access particular folders. Recovery attempts were to hang the drive as a slave off of others computers and to try an external USB connection.

 

After recovery:

We got the drive with all the data on it, so far it looks great, nothing is missing or corrupted. Once again your help is much appreciated. We certainly will keep using your company for our recovery needs...


 
 

Top of page


[Home]  [Prices]  [Shipping]  [Payment]  [FAQ and Articles]  [About Us]  [Contact Us